File:BrundleFab-Frame-Assembled.jpg: Difference between revisions

Latest revision as of 18:59, 16 February 2016

Assembled powderbed printer

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	20:41, 29 July 2015		2,448 × 3,264 (1.95 MB)	Ezrec (talk \| contribs)	Assembled powderbed printer

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone 4S
Exposure time	1/16 sec (0.0625)
F Number	f/2.4
ISO speed rating	160
Date and time of data generation	21:34, 28 July 2015
Lens focal length	4.28 mm
Latitude	40° 24′ 38.66″ N
Longitude	79° 59′ 34.59″ W
Altitude	354 meters above sea level
Orientation	Rotated 90° CCW
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	8.4
File change date and time	21:34, 28 July 2015
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	21:34, 28 July 2015
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	3.9658064516129
APEX aperture	2.5260688216893
APEX brightness	0.38036580813736
APEX exposure bias	0
Metering mode	Pattern
Flash	Flash fired, auto mode
DateTimeOriginal subseconds	403
DateTimeDigitized subseconds	403
Supported Flashpix version	1
Color space	sRGB
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	35 mm
Scene capture type	Standard
GPS time (atomic clock)	01:34:35.17
Speed unit	Kilometers per hour
Speed of GPS receiver	0
Reference for direction of image	True direction
Direction of image	213.48571428571
Reference for bearing of destination	True direction
Bearing of destination	33.485694822888
GPS date	29 July 2015

Revision as of 20:41, 29 July 2015 (view source) Ezrec (talk \| contribs) (Assembled powderbed printer)	Latest revision as of 18:59, 16 February 2016 (view source) Ezrec (talk \| contribs) (Ezrec uploaded File:BrundleFab-Frame-Assembled.jpg)
(No difference)