CR-30

From www.evillabs.net
Revision as of 21:16, 28 May 2021 by Ezrec (talk | contribs) (→‎Klipper Setup)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

CR-30 Belt Printer

The Creality CR-30 is a belt printer.

KlipperWRT Setup

Reprogram your Creality Box with KlipperWrt using this guide.

Klipper Setup

Package Baud Comment
klipper_cr-30_wrt.zip 230400 Klipper firmware configured for Creality Box w/KlipperWRT
klipper_cr-30_pi.zip 250000 Klipper firmware configured for RaspberryPi
  1. Check out Klipper at git hash 4f939c18e9ae86ef39d75b710fd1e0c72b46e927 
    • git clone https://github.com/KevinOConnor/klipper
    • cd klipper
    • git checkout -b ${USER}/cr30 4f939c18e9ae86ef39d75b710fd1e0c72b46e927
  2. Copy the kbaudrate.bin file to your SD card, and power cycle your printer.
    • Firmware update takes approx 30s
    • Your screen will remain blank - this is normal
  3. Use the the printer.cfg from the archive to configure klipper
    • (in ~/klipper_config/ for the KlipperWRT setup, or upload via Fluidd/Mainsail for Pi)
  4. Use `service klipper restart` on the Creality Box SSH console, or restart Klipper via the Fluidd/Mainsail interface
Retrieved from "http://www.evillabs.net/index.php?title=CR-30&oldid=892"