Fisnar F4200N

From www.evillabs.net
Revision as of 22:42, 29 October 2019 by Ezrec (talk | contribs) (Created page with " = Fisnar F4200N (and other F4000N class devices) Serial Control * Select 'Teach' mode * Use the Teaching Pendant to select Control By RS232 Mode (see manual) * Select 'Run'...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

= Fisnar F4200N (and other F4000N class devices)

Serial Control

  • Select 'Teach' mode
  • Use the Teaching Pendant to select Control By RS232 Mode (see manual)
  • Select 'Run' mode
  • Connect at 115200,8n1

All axis values are in decimal mm. Ie '100' or '12.568'

Code Action Returns
go Start current program ok
st Pause until START button pressed ok
in ??? 0

ok

iv ??? 1

ok

ha Home all axes ok
hx Home X axis ok
hy Home Y axis ok
hz Home Z axis ok
la X,Y,Z Start moving all axes ok
lx X Start moving X axis ok
ly Y Start moving Y axis ok
lz Z Start moving Z axis ok
pa Show all axes position X,Y,Z

ok

px Show X axis position Y

ok

py Show Y axis position Y

ok

pz Show Z axis position Z

ok