CR-30

CR-30 Belt Printer

The Creality CR-30 is a belt printer.

KlipperWRT Setup

Reprogram your Creality Box with KlipperWrt using this guide.

Klipper Setup

Package	Baud	Comment
klipper_cr-30_wrt.zip	230400	Klipper firmware configured for Creality Box w/KlipperWRT
klipper_cr-30_pi.zip	250000	Klipper firmware configured for RaspberryPi

1. Check out Klipper at git hash 4f939c18e9ae86ef39d75b710fd1e0c72b46e927

   • git clone https://github.com/KevinOConnor/klipper

   • cd klipper

   • git checkout -b ${USER}/cr30 4f939c18e9ae86ef39d75b710fd1e0c72b46e927

2. Copy the kbaudrate.bin file to your SD card, and power cycle your printer.
   • Firmware update takes approx 30s
   • Your screen will remain blank - this is normal
3. Use the the printer.cfg from the archive to configure klipper
   • (in ~/klipper_config/ for the KlipperWRT setup, or upload via Fluidd/Mainsail for Pi)
4. Use `service klipper restart` on the Creality Box SSH console, or restart Klipper via the Fluidd/Mainsail interface