CR-30: Difference between revisions
Jump to navigation
Jump to search
(Created page with "= CR-30 Belt Printer = File:CR-30.jpg The [https://www.creality.com/goods-detail/creality-3dprintmill-3d-printer Creality CR-30] is a belt printer. == KlipperWRT Setup...") |
|||
| Line 17: | Line 17: | ||
</nowiki> | </nowiki> | ||
2. Copy this [[ | 2. Copy this [[Media:klipper.bin]] file to your SD card, and power cycle your printer. | ||
a. Firmware update takes approx 30s | a. Firmware update takes approx 30s | ||
b. Your screen will remain blank - this is normal | b. Your screen will remain blank - this is normal | ||
| Line 23: | Line 23: | ||
3. Use the following printer.cfg to configure klipper: (in ~/klipper_config/ for the KlipperWRT setup, or upload via Fluidd/Mainsail) | 3. Use the following printer.cfg to configure klipper: (in ~/klipper_config/ for the KlipperWRT setup, or upload via Fluidd/Mainsail) | ||
[[ | [[Media:cr30-printer.cfg]] | ||
4. Use `service klipper restart` on the Creality Box SSH console, or via the Fluidd/Mainsail interface | 4. Use `service klipper restart` on the Creality Box SSH console, or via the Fluidd/Mainsail interface | ||
Revision as of 12:45, 28 May 2021
CR-30 Belt Printer
The Creality CR-30 is a belt printer.
KlipperWRT Setup
Reprogram your Creality Box with KlipperWrt using this guide.
Klipper Setup
1. Check out Klipper at git hash d619796495d24d4e4c3e6b9bf2b5842db18b1c01
$ git clone https://github.com/KevinOConnor/klipper
$ git checkout -b ${USER}/cr30 d619796495d24d4e4c3e6b9bf2b5842db18b1c01
2. Copy this Media:klipper.bin file to your SD card, and power cycle your printer.
a. Firmware update takes approx 30s b. Your screen will remain blank - this is normal
3. Use the following printer.cfg to configure klipper: (in ~/klipper_config/ for the KlipperWRT setup, or upload via Fluidd/Mainsail)
4. Use `service klipper restart` on the Creality Box SSH console, or via the Fluidd/Mainsail interface